WE ARE OPEN DURING THE COVID 19 CRISIS.
Attachment/Modifications Info
Wedge RCS
The RCS Holster Wedge is designed to mount to the inside face of the holster toward the muzzle end, the Holster Wedge will help lever the top and grip of the weapon into the body and maximize concealment especially in an AIWB configuration.
Modwing light bearing
Modwing light bearing
Modwing light bearing
This Modwing is designed to push against the belt line, which in return pulls the grip of the pistol into the body helping with concealment.
Primarily this wing is used on light bearing holster’s. It also depends on which belt clips are used. If you select a Paddle clip or Ulti Clip, the modwing will come standard with the holster.
Modwing standard
Modwing light bearing
Modwing light bearing
The ModWing is a standalone piece of concealment-enhancing hardware. It allows a user’s belt to apply additional leverage by rotating the holster and the grip of the gun towards the user’s body, creating better concealment and less user “printing” of the firearm and holster.
Paddle Clip /fomi
Mainly used for Magazine Carriers and Our Standard (Guard Holster)
Sweat Guard
Full and Half Sweat Guard:
The Sweat Guard is extra material that runs up the slide of the pistol, it gets rid of skin to steel contact, some of our customers prefer the sweat guard.
No Sweat guard:
The Slide can still be reciprocated while the pistol is holstered, The benefits of doing this technique will help prevent any re-holsters accidental discharges from occurring.
Cuts & Modifications
RMR
Colored Finishing Washers
finishing washers go around the screws.
Here are the colors we have in stock.
Blood Red, Coyote Brown, EMT Red, OD Green, Police Blue, Safety Orange, Safety Yellow, Tiffany Blue, White, Zombie Green
Site Content
Ulticlip 3
Ulticlip 3 can attach to any fabric material. It’s able to clamp onto gym shorts, yoga pants, shorts with no belt, sweat pants, etc.
Description
ULTICLIP3 SPECIFICATIONS
- 100% American Made
- Military Grade Black Oxide Finish
- Heat Treated to RC 42-49
- C-1075 Spring Steel
- Wax/Oil Treated Steel – aids in smooth operation & rust inhibitor
- Minimum Profile, Maximum Concealment
- Over 10X The Retention Compared To Most Holster Clips
- Multiple mounting holes
- Size: 3.5″ x 7/8″
- Weight: .78 oz.
Belt Clips J-Clips
Injection molded (Belt Clips)
Custom fit to every Holster.
Comes in 1.50” or 1.75”
OWB Closed Belt Loops
Closed Belt loops, injection molded, For Outside the waist band OWB.
Soft Loops
allows for infinite adjustability of ride height and cant within the 1" long slot. This allows the user to adjust the ride to exactly where it needs to be. The nibs along the sides of the slot grab the soft loop to allow the ride and cant to be adjusted and once set the loop cannot slide or rotate. On the back side, around the soft loop mounting points are ridges of material that are designed not only to stiffen the part, but to prevent the soft loop mounting hardware from contacting and potentially damaging holsters or pistols. There are three attachment points on the leg of the strut spaced 15mm apart center to center. The middle attachment point is a slot and allows the strut to be rotated for cant adjustment of about ten degrees in either direction. Makes the holster tuckable.
SFH MID RID
HB Quick Attachment System
SFH MID RID
Mid-Ride SFH Style Belt Loop Adapter:
- Will not pinch or add pressure to hip bone (support ridge removed from the belt shank)
- Locks onto the duty belt with belt slot design, no belt tension screws needed will not damage top of belt
- Converts holster to the 3-hole pattern; can convert holster to other style belt loops
SFH LOW RID
HB Quick Attachment System
SFH MID RID
LOW-Ride SFH Style Belt Loop Adapter:
- Will not pinch or add pressure to hip bone (support ridge removed from the belt shank)
- Locks onto the duty belt with belt slot design, no belt tension screws needed will not damage top of belt
- Converts holster to the 3-hole pattern; can convert holster to other style belt loops
HB Quick Attachment System
HB Quick Attachment System
HB Quick Attachment System
The HB Quick Attachment System includes the Locking Fork and Receiver Plate component. Constructed of injection molded nylon, the receiver plate can be attached at different angles according to user preference. The HB Quick Attachment System allows for quick transfer of gear between attachment points such as a belt, tactical leg drop or other stable platform. Allows users to rearrange gear quickly and easily without the use of tools.